Home / Pool Information / Above ground pool care

Above ground pool care

Above ground pool care

Owning an above ground pool isn’t a joke. Setting up and using above ground pools is quite easy but the maintenance is not easy. Above ground pool care is a bit of responsibility, but the joy of cooling off with your kids right in your backyard make it worthwhile. Read up these step by step above ground pool care tips to proper maintain a healthy, clean and sparkling pool.

Step 1 – Pump Maintenance

The state of the pump is essential to any above ground pool. The pump provides the power to circulate the water and force to push it through the filter. Normally, all the water in the pool should be turned over within 8 hour time. It is best to run the pump during the day, ideally for about 8-12 hours at a time. When water is in motion, it is hard for bacteria or algae to live in it. Also, debris can be easily captured by the filter in moving water.

 

Step 2 – Filter maintenance

The purpose of the filter is to catch and remove microscopic and visible debris. Your above ground pool Sand and D.E filters are cleaned by backwashing when the filter’s pressure gauge shows a level of 8 – 10 lbs. Cartridge filters are easier to wash because you can simply remove the cartridge and clean it. After a while, you need to change the filter for proper functionality.

 

Step 3 – Pool cleaning

Cleaning your pool is at least once in a week is essential. All above ground pools have little area making circulation inadequate. This results in breeding grounds for algae and bacterial growth, consequently making the pool unhealthy. Once in a week, the walls and floor of the pool should be vacuumed and brushed.

Step 4 – Test water for the major factors

You should test your water regularly for pH and sanitizers. Testing for at least three times per week is very essential. Regular testing of sanitizers and pH will guarantee crystal clear pool water all season. With a digital test strip reader, the process has been made quicker and easier. The pH should be within the range of 7.2 and 7.7. If the pH is outside this range, the effectiveness of pool chemicals of pool chemical will be reduced.

Step 5 – Chlorinate above ground pool

For a healthy pool, you need to sanitize your pool regularly with chlorine tablets or other sanitizers. Chlorine tablets are compressed which allow them to slowly dissolve and steadily release free chlorine into the water. Chlorine clears out the bacteria and algae colony in the water and keeps it clean.

Step 6 – Shock your above ground pool

When the debris in the water build up to a level, the water causes skin and eye irritation and the water becomes colored. At this point the best solution is shocking your above ground pool; shock is concentrated chlorine treatment. Shocking the pool once in a week oxidizes the contaminants, keeping the water clean and clear. It also kills refractory algae and bacteria in the water.

About admin

Check Also

Pool Pump Installation Guide

Pool Pump Installation Guide The necessary tools to installing a pool pump: The technical pool ...